- Home
- 產品介紹
- 4G行動電話節費盒 (FWT)
- MaxComm 4G VoLTE Box FCT-606
The MaxComm FCT606 is a small and simple VoIP/VoLTE Phone Box. This can allow customer to maintain a physical hardwired phone in the home or office without the need of having internet connectivity through an ISP.
FCT606 can replace traditional wireline home phone using VoIP/VoLTE and works any coded or cordless phone.
The FCT606 has a sim card slot, you do need to subscribe to an operator with VoIP/VoLTE service enabled. So you have a real local phone number to call and answer.
FCT606 has high quality HD voice, echo cancellation, and various supplementary services.
• 4G Cat.4 LTE for download 150Mbps / upload 50Mbps
• Voice service based on SIP/IMS
• Support CS Call
• Dynamic Jitter Buffer, Echo Cancellation and HD voice
• Call Hold/Un-hold/Switch, Conference Call, Call Waiting, Call Forwarding, CLIP, COLP, Call Barring, Caller ID
• SMS
• Support Fax Machines
• Web GUI for technician and troubleshooting
• Support AT Command CLI
|
PHYSICAL |
|
|
CPU |
• Qualcomm MDM9207 |
|
Power Input |
• DC input: 12V / 1A |
|
Dimensions |
• 105 mm (W) x 80 mm (L) x 40mm (H) |
|
Interfaces |
• 1 x USB2.0(Micro-USB) • 1 x FXS port (RJ11) • 1 x Nano SIM slot • 1 x Power ON/OFF button • 1 x Factory Default button |
|
LED Indicator |
• 3 x LED: Phone, Mode, Signal |
|
Button |
• Reset to Default |
|
Power Consumption |
• 5W |
|
Environmental Conditions |
• Operating Temperature: 0°C to 45°C • Operating Humidity: 5% to 95% non-condensing |
|
Antenna type |
• 2 x internal LTE antenna |
|
Mounting |
• Desktop and wall mountable |
SPECIFICATIONS
|
LTE |
|
|
LTE Standard |
• Cat.4 LTE |
|
LTE Bands |
• LTE FDD : Band 1,2,3,4,5,7,8,20,28 WCDMA/HSPA+ : 1,2,5,8 |
|
Spatial Streams |
• 2 X 2 MIMO Downlink |
|
Performance |
• DL : 150Mbps • UL: 50Mbps |
|
Typical transmit power |
• 23 dBm |
|
Typical receiver sensitivity |
• -97 dBm @ LTE FDD, BW=10MHz |
|
Region |
• LA / EU |
SOFTWARE FEATURES
|
|
|
|
Voice Service |
• FXS Phone • HD Voice • Multiple voice: VoLTE, VoIP based on IMS, CSFB. • Audio Codec: G.711, AMR, AMR-WB. • Compatibility: conform to SIP and IMS standards. • Emergency call. • Supplementary Services: call hold/un-hold/switch, call waiting, conference call, call forwarding, CLIP, COLP, call Barring. • Supplementary Services Configuration: USSD, XCAP. • VBD and T.38 Fax |
|
Network Access |
• Multiple PDN for Customized Service • Customized AT/CLI Command • LED Indication |
|
Management |
• Built-in web server for web-based configuration • Password protected access and configuration • Device Firmware Upgrade • Advanced Troubleshooting • Device Alerts • SMS over CLI |
|
Remote Management |
• TR-069 management • TR-181 data model • Customized data model • XMPP client • SSH • Web-based browser Interface • Status display and event report |
|
|
LED Color |
Meaning |
|
TEL |
blue on |
off-hook |
|
blue blink |
incoming call |
|
|
off |
hook on |
|
|
MODE |
Blue on |
Registered in LTE |
|
Green on |
Registered in 3G |
|
|
Red on |
fail to registered network |
|
|
Red blinking |
no SIM or PIN code failed |
|
|
Green blinking |
During boot up |
|
|
SIGNAL |
Blue on |
Signal strength high |
|
Green on |
Signal strength medium |
|
|
Yellow on |
Signal strength weak |
|
|
Red on |
Signal strength low or no signal |
|
|
FW upgrade |
Blue Carousel |
Carousel TEL-MODE-SIGNAL. Blue Carousel means: T0 - LTE BLUE ON, Mode OFF, SIGNAL OFF T0+1 - LTE OFF, Mode BLUE ON, SIGNAL OFF T0+2 - LTE OFF, Mode OFF, SIGNAL BLUE ON T+3 - LTE BLUE ON, Mode OFF, SIGNAL OFF |
Note:
SIGNAL LED thresholds are defined as below:
For 4G:
>-90~-93 good coverage (BLUE)
-94~-97 fair coverage (GREEN)
-98~-102 minimum coverage (YELLOW)
<-102 poor coverage (RED)
For 3G
>-92~-95 good coverage (BLUE)
-96~-99 fair coverage (GREEN)
-100~-104 minimum coverage (YELLOW)
<-104 poor coverage (RED)
